Day: August 15, 2019

Commercial Roofers Near Me

If the roof of your building needs repair, fixing it quickly could prevent further damage. You should not rush to hire a commercial roofer without doing some homework first. If you do, you may end up with roofers who do not have the best record of accomplishment or experience for the job. If you need a commercial roofer, below are five tips that will help you to select the right one:Hire a Company that is Licensed, Bonded, and Insured:A roofing license shows that a roofer possesses formal roofing knowledge:Roofers near me  is an excellent resource for this.

-Bonding compensates you for possessions that are stolen by a roofer’s employees.

-Insurance compensates you for property damage or a personal injury that results from the roofer’s work.You can check a company’s licensure by contacting your state’s licensing bureau; you can check if a company is bonded by speaking with its bonding agent; you can check if a company is insured by contacting its insurer and presenting the insurance policy number.Commercial roofers that are reluctant to show proof of licensure, bonding, or insurance should not be hired.

-Do not hire a Company that Asks for Full Payment Upfront:

A roofer that asks for payment up front may be planning to steal your money, or is hoping to attain money to finish another project. Regardless of why a company requests full payment up front, do not supply the payment. Even if a commercial roofing company is trustworthy, paying the full amount in advance will give it less motivation to complete the job in a timely fashion. When your roof is leaking, an unmotivated contractor is not a good thing.

-Commission a Business that has Local References:

Hiring a company that has local references allows you to view the work it performed for the references. It also allows you to establish the legitimacy of the references. If a company supposedly does business in your town, but it only has out of town references, something is not right.

-Stay Away from a Company that Lacks a Physical Business Location:

Some contractors earn money by traveling through towns, leaving jobs unfinished and taking people’s money. Because of their modus operandi, these contractors cannot settle, which means they never have a physical business location. A well-established, successful roofer always has a physical business location.

-Go with a Business that Understands Your Building’s Roof System:

A commercial roofing company usually specializes in certain types of roofs. However, some companies agree to work on roofs of which they are not familiar. Because different roof systems require different types of installation, maintenance, and repair, hiring a company that has experience working with your building’s roof system is the best choice.

Geothermal Heat Pump

Image result for Geothermal Heat PumpHow does a Geothermal Heat Pump get the heat from the ground? The heat pump utilizes a loop of refrigerant sucked through a vapor compressed refrigeration cycle moving heat either in or out. The source of heat is actually much more stable and continuing then air based heat which tends to be less controlled. The other benefit is that Geothermal Heat pumps can also be used to pump the heat out of your house for instant cooling during hot weather. Geothermal heat pumps are also more economically friendly and can reduce the effects of pollution, electricity, and global warming.

What are the different kinds of Geothermal Heat Pumps? So far some of the different types of geothermal heat pumps in existence are; Ground Exchange, Direct Exchange, closed loop, vertical, horizontal, pond, open loop, and finally standing column well.

o Ground Exchange – This type of heat pump uses the grounds current heat and exchanges it with the temperatures in your home. If you plan to have a ground sourced heat pump then you will need a heat exchanger which sits against either ground or ground water to make the pump function properly.

o Direct Exchange – Instead of using a circulating refrigerant the direct exchange geothermal heat pump works by using a SINGLE loop refrigerant in direct thermal contact with the ground.

o Closed loop – The typical system uses two loops on the ground side and one loop located in the appliance cabinet which exchanges temperatures with the loop which is pulling the temperatures from the ground. Closed loop systems have much longer and larger pipes implemented into the ground for better accuracy and also have an extra loop located in between the refrigerant loop and the water loop, pumping in both loops. navigate here

Related image

Closed loops come in two different types themselves one being the vertical closed loop and the other is the horizontal closed loop. The difference between the two being the vertical closed pump has pipes which run vertical through the ground while the horizontal closed loops have pipes running horizontally through the ground.

o Pond – Pond based heat pumps are not commonly used due to the need to be close to an external source of water. Pond based heat pumps are more preferred and recommended for people who want to use a pump but have bad quality water, or a low heat source currently containable by a standard heat pump. The Pond based heat pump gets its name from the fact that the loop dragging in the heat is located underneath a large body of water, for example a pond.

o Open Loop – An open loop is a heat pump which draws in water from an external source stores it in the main refrigerant where heat is extracted from the water source and the water is then returned to the external source.

o Standing column well – A standing column well heat pump is much like an open loop heat pump except it is designed to pull in water from deep within a well and exchange it for heat in the main refrigerant where it is then returned back into the well while traveling down it exchanges heat with the bedrock.

How does a geothermal heat pump work in large buildings?

A geothermal heat pump works in all different ways each make varying depending on its best function for what it is replacing. For example a heat pump moves anywhere in between three and five times faster than the heat or electricity in which it consumes it is actually outputting more energy than it is inputting this causes the efficiency of thermals to exceed anywhere between 100 and 200 percent. While your average electric device will typically never exceed 100%. This proving that a geothermal heat pump will always exceed the performance of the electric device it is equivalently designed against for a specific building or structures size.

What is the environmental impact of geothermal heat pumps?

The impact is to be frank very positive, producing less greenhouse gases, and built to be biodegradable and non toxic in the external sources. But the negative side is that the refrigerant system uses a type of refrigerant which is actually a cause of depleting the ozone layer. This refrigerant is called chlorodiflouromethane, it is harmless when used properly but leaks can cause the ozone layer to deplete. But don’t worry this product has been favored out and is being replaced with a more environmentally safe product.

Plumbing System

Too many homeowners only call a plumber in the case of a plumbing emergency. This is not good because home owners should be calling a plumber before an emergency takes place. Regular plumbing maintenance and inspections can drastically reduce the chances of another plumbing disaster or repair. A small plumbing issue can become a larger and more costly repair if not caught in time. Basement flooding, water leaks, burst pipes, and more can cause thousands of dollars of damages that could have otherwise been avoided with some simple routine maintenance and repair. Fortunately, there are several things a person can do to prolong the life of their plumbing system and prevent plumbing emergencies. Continue reading to learn how to care for your home’s plumbing, properly, and who you should call if you require plumbing repair services. P&L Plumbing

-Plumbing Maintenance and Care

Always remember that a little preventative maintenance goes a long way for a residential plumbing system. Preventing emergencies like clogged drains, toilet overflows, water heater failures, and more can feel very good to a homeowner’s budget. Preventing these issues also prevents larger disasters from occurring. This saves a household thousands of dollars each year! A properly cared-for plumbing system simply won’t require as much repair and replacement. Check out some DIY methods to prolonging and caring for your home plumbing and start preparing your system for the long-haul!

-Water Leaks

Regularly inspect all areas of your home for potential water leaks. This means checking the faucet for excessive dripping, inspecting the HVAC system for possible leaks, looking out for moisture accumulation on appliances or pipes, and more. This should be done at least one time a year. Finding a water leak in its beginning stages can stop possible flooding situations, structural damages, and mold problems; saving a home owner a lot of money.

-Septic Tanks

Septic tanks can cause severe home disasters. For anyone who has experienced a septic tank flood will tell you it’s a nightmare and costs thousands of dollars to cleanup and repair. Severe storms and system defects can cause septic tanks to malfunction or overflow, causing extreme home damages. It is strongly encouraged to install a battery-powered back-up sump pump for emergencies. Also, have your tank checked by a licensed master plumber at least once a year; or more if your city experiences higher precipitation levels and rainy seasons.

-Water Heaters and Conditioners

Water pressure can be an indication that something is not quite right with your plumbing. Check the shower heads and faucets for reduced water pressure. This can be a sign that you have sediment buildup in your plumbing system, or worse, a faulty water line. You may also have sediment buildup in your water heater, causing loss of performance and corrosion. It is important to have a licensed master plumber empty your water heater, and clean the sediment from your system a few times a year. This can reduce several costly problems and repairs.

-Gas and Water Shut-Off Valves

Every homeowner should know where their gas and water shut-off valve is located, and how to operate it in the case of an emergency. If you ever need to turn your water off, be sure to also turn off your water heater so to not damage the heating elements within it. If you ever smell gas, act immediately. Turn your gas valve off and leave your home. Also, at the same time, do not flip off light switches or use anything that can create a spark. Just leave the premises and call for a master plumber to inspect your home. Gas leaks can be fatal, so it is vital to always take immediate action if you think you smell gas. Plumbing maintenance can prevent very expensive plumbing disasters, emergencies, and repairs, and even save lives. Don’t wait any longer to have your plumbing inspected by a licensed professional. You can save yourself thousands of dollars by catching a plumbing problem ahead of time, and having it fixed by a trained plumber.